After a renovation, dust spreads easily through the whole space and settles even where no work took place. The final clean gives the best result when you prepare for it properly. These general tips will help you avoid repeat work and unnecessary costs.
Construction dust is very fine: it stays in the air for hours, gets into cabinets and ventilation, and settles again on surfaces that are already clean. On top of that come traces of paint, filler, glue and mounting foam, which household products do not always remove easily.
That is why this kind of cleaning usually happens in several stages: first the waste and main dust are removed, then surfaces are washed, and finally the details get attention.
Plan the cleaning for a time when all dusty work is complete. If someone drills a wall or sands a threshold afterwards, part of the job will have to be repeated.
Before agreeing on a date, check with the tradespeople whether any small finishing jobs remain. Ask separately about fitting skirting boards, curtain rails and light fixtures, as these are often done last.
Clear away construction waste, tools, packaging and bags of mixes to free up access to the floors and walls. Check who is responsible for waste removal: many apartment buildings have separate rules for this.
Ventilation helps get rid of the smell of paint and reduces the amount of dust in the air. Open the windows for a few hours before and during the cleaning, if the weather allows. Keep doors closed between rooms still being worked on and clean areas.
A broom only lifts fine dust into the air. The main dust is usually removed with a construction vacuum cleaner with a suitable filter, followed by wet cleaning. A household vacuum may not cope with this load, so check that yours is designed for it.
Before washing, walk around the space and note what needs to be removed.
Do not use abrasive sponges or blades on unfamiliar surfaces without testing on an inconspicuous spot. Scratches on glass, glossy tiles or laminate cannot be washed away later.
Cleaning usually goes from top to bottom: the ceiling and upper walls, light fixtures, curtain rails, windows, furniture and only then the floor. This way, settling dust does not land on areas that are already clean.
Wipe the inside of built-in cabinets and drawers before putting things away. Do not forget ventilation grilles, radiators and the space behind them.
It is easiest to bring in furniture and textiles after the main cleaning. Curtains, carpets and upholstered furniture readily absorb fine dust. If the furniture is already in place, cover it with film during the work.
This is a demo article containing general tips only.